No wonder I'm depressed....

Today turned out to be yet another dull, grey, dreary day. No rays of sunshine to lift my gloomy mood. The one thing I love about the US is the way there are many more sunny days than cloudy days. Cloudy days just sap my strengh and my will and frequently (as today) give me a distanced feeling as though I'm not really here. I believe it's called Seasonal Affected Disorder.

Despite this, I went to the bus to install my new vanity top and promptly broke the tip off my drill bit, rendering it useless. That meant a trip to Lowes (hiss, spit). There, I picked up a couple of packs of 3/32 drill bits just in case. While I was there I also picked up a 5-15 plug to make the other half of my 20A extension cord. I don't want to get the 30A cable yet - I'll stay cheap right now. Then while I was there, I looked at plumbing supplies but as I didn't know exactly what I have, I didn't get anything. It turned out from investigations last night that the second part of the downpipe from the shower isn't needed - the plastic fittings I have will clamp onto the first section very sucessfully. It seems that I can simply take an off-the-shelf fixture to fasten the bottom of the tube to the side of the bus. There are some rather nice valves available to use to close the end of the pipe off when it's not needed to empty. They're somewhat stiff which means they'd definitely need to be secured very firmly. Thus, for the moment, I'll stick with my screw-in bung.

Returning to the bus, I screwed the countertop down that I'd been working on yesterday then sat in the bedroom with a cup of tea and my tablet for a few minutes. What with the dreary, miserable weather I'd taken to playing a game called "Boom Beach" and without funding the programmers drug habit by buying game credits with real money that's hard to earn, it was increasingly hard to continue. Thinking about it, while watching the dwelling I'd just errected commencing its count down to 5 hours before it could be used, I came to the inevitable conclusion that the game was as the Americans euphamistically say, "a crock".

Having deleted the game, I set about cutting some more steel for the battery compartment only it wasn't that simple. The angle grinder needed a new disk so that was installed. Then I had to find the adaptor in order to connect the grinder to my TT30 socket. That was a hunt! It was eventually discovered, hidden underneath an immense pile of Christmas stockings.

I cut the steel and then tried to straighten an angle out of the steel. It's showing progress but the work is very slow. I suspect that this might take longer than I want to spend on it.

Meanwhile, I looked at the DMV form to retitle the bus and it needs photographs of the inside plus details plus the original bus title. This is a totally different form from the one I was shown before. It looks way more likely as a form so I suspect I probably have the right form this time. I have a lot of tidying to do inside the bus before I take photos. 

I believe I'm pretty close to having it in retitlable condition. As far as I can see, I can just run it as an electric motorhome and pop a portable generator in for the inspection. Water - aside from plumbing the waste pipe properly, is already done. The shower curtains, blinds over the windows and a front door unlocking gizmo is all that's needed. Everything else should work just fine. The whole bus needs a darned good cleanig and spruce up but that should be it!

Ouch! My sore arse...

Now I know what a gay man feels like! My arse is still very tender after sliding down those stairs the other day. Indeed, it's now a nice shade of purple. I did wonder how close to the purple of the galley area of the bus it is but it would be hard to color match and I'd have to get somebody else to hold up the color matching cards. I don't think the world is quite ready to see my bare arse!

Today I fully intended to get to work on the coil for the front door unlocking system but as soon as I got to the thing, the glue had failed where I'd glued the enamel wire to the brass tube. That was addressed by cleaning the glue off the tube and the wire then wrapping aroud and spraying with varnish. That should hold it. If not then I'll have to go back to taping it.

Meanwhile, those with longer memories will recall my bathroom vanity. I'd cut a hole in some wood to make the original kitchen fixture back around January and then subsequently recycled the wood when I built the current vanity to include the original handbasin that came with the bus. As that handbasin totally lacked any means of securing it to the vanity and as it also had two large holes for water piping that I coudn't easily fill, I removed it and replaced it with a piece of OSB cut to size.

Today - even though it was pouring with rain, I took that OSB to one of the abandoned sheds on m'lady's land and sprayed it white. The paint dried to touch dry astonishingly quickly given that it was - as I said - pouring with rain. 

Having sprayed both sides, I took the OSB to the bus and set it in place. I'll screw it down tomorrow. It had been dark, rainy and overcast all day so by the time it was dry enough to put in place, it was already dark.

The plan is to stand a jug and a bowl on the vanity top. Think back to the Gary Cooper westerns where in the hotels there was a chamber pot in the room and a bowl with a jug for washing. This setup gives me so much more flexibility because after washing I can just open the emergency exit door (conveniently situated to the left of the toilet) and simply chuck the water out. In more regulated climes, I can empty it into the bucket underneath the vanity ready to empty at leisure. Now the downside of this arrangement is that unlike an ordinary handbasin, I now have nothing that doubles as a urinal unless I use the shower. Fortunately I do have my bucket and I suppose that could double though it'd have to be scrubbed every time it was emptied or it'd begin to smell. On the other hand since Walmart buckets are $2.50 and the lids $2, it's no hardship to treat myself to a new one every now and then.

Thinking about the front door unlocking mechanism, if the current electro magnet idea doesn't work then I might work on some kind of cam mechanism and an electric motor. That stands a reasonable chance of success though it would have to be designed such that it doesn't remain in the unlocked position.

When the rain finally stops, I'll be able continue with construction on my battery compartment. That will first require the battery compartment floor components to be derusted, painted and welded into the compartment. Then I'll paint the whole compartment. The sides will be thinner and riveted in place after the whole thing has been welded underneath the bus.

I realised I should try to get the bus retitled as soon as possible. I need to get the plumbing under the bus completed which will basically be a downpipe going to a U bend then down to a tap that I can close when I don't want to let water out. Being closable also means it's a way of keeping critters out.

Cooking is an interesting thing. For cooking, the answer could be electric, gas or tea-lights. I've been reading about cooking using tea lights and how many preppers use tea lights for their cooking needs. I already know how to blanch almonds using a candle and a spoon but this is more interesting. I like the idea of using tea lights as the worst that can happen handling a tea light is that it melts in the heat or bounces on the floor when dropped. Unlike liquids or gasses, they're much more controllable. They also keep almost forever and the biggest thing of all - they're pretty darned cheap. Now the downside is soot but as I was already going to have to install some kind of exhaust vent, it shouldn't be a great problem.

Thinking about exhaust vents, I could put one at the top of the window I filled in or I could make a hole through both layers of the roof. On the whole, I suspect they both have the same number of problems. The biggest will be leakage and then insulation. I don't think welding will be a good solution for the vent. 

Another epiphany

Toda started with the usual tummyache after eating too much on Christmas day. Then I headed outside to do battle with the metal that I dragged out of the bushes a few days ago that looked like an ideal floor for my battery compartment.

Cutting thin metal is always a challege for my angle grinder - which is now working perfectly thanks to the new carbon brushes and I went through several grinding disks. Good job I bought a second 10 pack of disks a while ago! Just look at the state of the disk I've just been using.

I cut the steel construction I found a few days ago, cutting the edge off one side and cutting it in two such that when two edges are welded together, the construction will be approx 18" by 29" which is about the size of my battery compartment.

As the steel had some handy folded edges, these will act as a strengthening bar down the center of the compartment. Very useful. I had, however to trim the excess fold off as it is somewhere water is likely to collect.

While cutting the floor of the battery compartment, a thought came to mind that has occurred before - namely why I'm even putting a battery compartment. I definitely need access to my main breaker panel and that's always best under the bus. Other than that, I can store the cables more securely inside the bus.

Given that I'm not putting a big house battery, the point of a battery compartment is somewhat questionable. Having said that, it does set me up for future expansion.

Thinking about batteries I was wondering about using NiMh batteries rather than lead-acid or lithium. Lithium batteries are just horribly expensive. NiMh batteries just don't seem to be available in 12v. This is a bit annoying! Out of interest, I looked up NiMh AA batteries and found I could get 48 for $24 and 3,000mah each. If they were put in sets of 10, giving 12v per set then I'd get 4 sets at 12,000mah or 12Aah. 

Thinking further about the NiMh idea, 6v would be way easier to work with just 4 batteries put in series. The downside is that all the charge controllers are set up to charge lead-acid or lithium batteries. To my mind, NiMh is way better than lead-acid because it doesn't gas and can be completely discharged without harming the battery.

Given that the only power I'd need would be to charge my phone, tablet and batteries for my LED lantern and my shower pump, I could probably get away with just D cells and a solar D cell charger. The D cells could in turn power a USB charger. Heaven knows how long that would take to recharge my phone though.

There are a whole load of different options out there for power. My favorite for cooling and for refrigeration at the moment are fans powered solely by solar power and a fridge powered solely by solar. The cold could be maintained in a fridge by simply using freezer blocks. The fans need only to remove heat when the sun is shining. As for the rest, lighting, the shower pump and phone charging - these can all be done from NiMh D cells. For the moment though, I shall continue the plan to install the battery compartment and the shower outflow.

Meanwhile, in a stunning development, the bathtub that m'lady often complained about has vanished. It didn't so much vanish in a puff of smoke but more behind a garden tractor and was hauled to one of the junk piles in the back yard.

It certainly looks better without the bathtub. For those with long memories and the ability to hunt through this blog, the bathtub came out of the original construction. It was used for most of the last year as a handy trash recepticle and had it not been full of trash, would have been easy just to carry.

Things are definitely progressing. The last thing done today was to paint the underside of the new bathroom vanity. This vanity will not have a sink. Instead it will have a removable plastic bowl that can be emptied either into a bucket or down the shower and hence into the bucket under the shower or onto the ground.
Apparently emptying water that's been used for hand washing is frowned upon. That seems to be just plain bizarre to me but I suppose if dumping grey water was approved, people would stretch it further and dump sewage too. Honestly though, as long as its buried properly even sewage can be disposed of outdoors without harm to the environment.

Screwing around

Today after work, I did a little inside the bus. The first thing was to tidy the floor a little. This was achieved by picking up the sink unit and popping it into its mount on the vanity. It's not screwed down because I had the fresh ideas yesterday.

After that, it was time to clear the dinette countertop. This was achieved largely by transferring the supplies from one counter to the other. I still have a massive problem. It's just moved from one side to the other.

Of course, in so doing, I inadvertantly tipped a load of screws into my tool box on top of the very tools I needed. I just didn't think ahead! I'll blame it on being tired after work! Fortunately the two tools I needed were my countersink head and a drill bit. The aim was to screw the countertop down prior to painting. Painting was not done today.

Fortunately, with sufficient pressure and an electric drill, its possible to make drywall screws countersink themselves. This worked well. Oddly I found I had not put a cross member under the join in the OSB. I'll have to see how that works out. Still, it is just a desktop - no weight of pressure expected.

Tomorrow I might even get to slap some paint on it! Then I will be short of three things that I was to have done this weekend:
1 the closet chain
2 the shower base mount
3 painting the galley floor

In other news, a few weeks ago I took down the personal bio. There's no particular need for it. I'd rather stay anonymous. Today I put up an FAQ page. How long I'll leave that up remains to be seen. Enjoy!

Virgin Exit

Glancing around my bus, I noticed the sign above the side exit. That had me wondering what manner of schools they have in Tennessee. Perhaps I'm better off just not knowing...

Today I looked at yesterday's work and found I'd inadvertently bolted the leg of the vanity to the floor in the wrong place. I spent quite a while getting it better situated. It's not perfect but its not visibly wrong now.

I know exactly why I got it wrong. Heat exhaustion had set in yesterday. I really, really cannot cope with the ludicrous heat in South Carolina. If I had to spend more thgan 30 minutes working in it, I'd be dead and thats a fact! It takes longer to cool down than it does to get hot.

Anyway, the leg was adjusted satisfactorily and a side cut from my remaining OSB to fill in the side of the vanity. The original top from the original kitchenette I built came in very handy as the top of the vanity. This, by the way, is the only sink in the bus.

Yesterday I looked online at flushing camp toilets, thinking I could out my grey water into the tank and use it twice. It seems most have a leakage problem. That and the $70 price tag had me thinking more about a $8 sheet of OSB, a couple of pieces of $3 2x2, some screws and brackets. I also thought about the problem with ordinary house toilets that seem to block all the time. Dry toilets are so much more hygienic!

Anyway, I worked more on the vanity and ended up with this. I'm probably not going to put a door on the front. I might put a lip to stop things sliding out but as all it will hold is toilet rolls and initially a waste water tank, it doesn't really need a door.

Well, my OSB supplies are dwindling as are all my supplies. I noticed one OSB offcut that would do very nicely as a desk/table in the bedroom. I have a feeling that's where its going to end up. Whether I have sufficient OSB to build my toilet, I'm not yet sure. One thing is certain though and that is that construction is rapidly approaching conclusion. Plumbing will initially be very simple, as will electricity but those are things that can be built up at leisure. I can see my sending off to get the bus registered as a motorhome soon!