No photos today. I did work on the bus but not very much. I started the day by heading to Lowes (hiss, spit).
On the way to Lowes (hiss, spit) I became aware of not feeling too well. I pressed on and got the stuff needed from there. That was entirely plumbing supplies.
Having left, my next stop was Tractor Supply where I got the steel rivets Lowes (hiss, spit) can't be bothered to stock. I also got the hardware needed to hang a fresh water barrel. Still not feeling well, I headed off to Home Depot.
At Home Depot I was feeling pretty rough and forgot the jubilee clips I'd wanted but did get the turnbuckles needed for the water tank. Having done that, I started home.
Feeling like death walking, somehow - with breaks lying down in a cold dark room, I managed to unload the car into the bus. While in the bus I paused to gather a handful of receipts that m'lady is totting up for me. I remember telling her not to let me know how much it has cost until it is complete. I don't want to faint!
In my only construction act today, I drilled two holes and riveted a handle to the outside of the folding door. Now I have something to hold onto when I close the door. This will make life so much easier. Needless to say, putting it on was distinctly challenging. First it was dark and I had to hang a lantern off a nearby tree branch. Second, the riveter didn't cooperate well. Drilling the holes was no problem. It was the riveting that was hard. It seemed as though the riveter was sliding on the rivet pin rather than pulling it. It seemed to take forever, switching between riveters but it was done, by which time I was almost about to indulge in psychedelic yodelling!
A couple more trips into the cold, dark room and I'd locked everything away for the night. M'lady was concerned that I should eat but as what I have seems to be a migraine, it was avoided.
Meanwhile, I heard back from the DMV. It only took them a month to tell me I have to send them $15 and my bus title to get it retitled as a motorhome. I suspect they might want to inspect too but that I'm ready for.
Showing posts with label title. Show all posts
Showing posts with label title. Show all posts
Sunday, April 24, 2016
Monday, March 14, 2016
In the post
Today I did it - I posted the application to retitle my bus as a motorhome. As far as I know, that should get to the DMV in a few days. I'll doubtless have to reinsure my bus as a bus before they look at it and change the title since the insurance is up in about a week. The insurance company has been reminding me for the past six weeks to renew my insurance. They just don't realise that I don't ever give anybody free use of my money when it can stay in my own account earning interest until I really have to spend it. Thus, I normally get my insurance on the day before it's really due.
The socket cover I painted yesterday looks really good and matches the rest of the bus rather nicely. I meant to try scraping the paint to see if it comes off as I have little confidence in paint thinner making anything stick to my bus. It seems to reject just about every attempt to prepare the surface for fresh paint. Even stripping down to bare metal could be challenging as the steel is zinc plated. I did get brake fluid just for this but had forgotten about it until now.
In other news, the hour advanced on Sunday night leaving me now with over an hour after I return home before sundown. Had I not been so tired today, I would have worked on my bus.
I am giving thought to alternatives to power and to attaching my barrels. It strikes me that U bolts could be used to tighten chains and coincidentally would be a load cheaper than using turnbuckles. If I'm right, it could be possible to attach the barrels without needing to do any welding whatsoever underneath the bus.
As far as the house battery is concerned, I suspect plugging into the cigarette lighter socket when I'm driving could well work best unless I can tap into the alternator circuit. Combining that with a charge controller would be an interesting approach. Indeed, looking at the LIon batteries I have been looking at online, I could probably fit them into a small ammunition box. I'm a big fan of small ammunition boxes as I can pack charge controlers, battery meters, cables and USB sockets etc into them as well as the batteries. In other words, a complete and portable power source that can be carried inside the bus. Truth be told though, I'd really prefer to use a supercapacitor
One of the things I'm a fan of is simplicity. Why go to the trouble of slinging things under the bus if it's not essential? The extraction fan for the bedroom can be solar powered on the basis that it's there to remove heat, not ventillate as the bus has plenty ventillation anyway.
With the LIon house battery in a portable case, it could be charged on 120v just about anywhere. The beauty of a standard solution is it can be put together like Lego blocks. Supercaps aren't mainstream which means it'd be a build-it-myself solution and even following published plans, those things don't always work. I really like the idea of building my own electronics but 75% of the time they don't work even when made from a kit and checked scrupulously. Mind, that's petty much my experience of ready-made electronics anyway.
So, the upshot is, tasks remaining to complete:
1. Replacing self-adhesive blinds with roller blinds.
2. Installing waste water tanks.
3. Developing a house-battery solution.
4. Installing a set of bungie cord anchors for the back closet.
5. Replacing or blocking the back door lower window.
6. Replacing or blocking the two back windows.
7. Developing and installing a front door unlocking system.
8. Blanking the school bus flashers.
9. Replacing the arrow indicator lenses with amber flasher lenses.
After all that, I'd say the bus is probably about as ready as it'll ever be. I would kinda like to put some kind of handbasin in the bathroom but a bowl will do quite well.
One of the interesting things that has come to my attention is urine disposal. I hear that peeing in a composting toilet makes the whole thing stink. I'm not quite sure how it will be affected by the fact my toilet is modelled after a cat litter tray. The deposits are simply covered with cat lit. The other day, there was an article in which one bus conversion owner complained she and her girlfriend discovered they had to go and pee in the forest rather than their composting toilet. The upshot was that in the end they replaced their composting toilet with a flush toilet though the domestic toilet they used would use about 10 gallons in a single flush. That's fine for campsites but otherwise, not so great. I would not be too surprised if in the end I decide to install a black tank and a camper toilet. Now the water from that could be pumped from the shower grey tank or if the handbasin empties into a 5 gallon bucket then that could be a source of flush water.
Well, in a few days I should hear more about reclassifiying my bus as a motorhome. I think there's enough there for it to work.
The socket cover I painted yesterday looks really good and matches the rest of the bus rather nicely. I meant to try scraping the paint to see if it comes off as I have little confidence in paint thinner making anything stick to my bus. It seems to reject just about every attempt to prepare the surface for fresh paint. Even stripping down to bare metal could be challenging as the steel is zinc plated. I did get brake fluid just for this but had forgotten about it until now.
In other news, the hour advanced on Sunday night leaving me now with over an hour after I return home before sundown. Had I not been so tired today, I would have worked on my bus.
I am giving thought to alternatives to power and to attaching my barrels. It strikes me that U bolts could be used to tighten chains and coincidentally would be a load cheaper than using turnbuckles. If I'm right, it could be possible to attach the barrels without needing to do any welding whatsoever underneath the bus.
As far as the house battery is concerned, I suspect plugging into the cigarette lighter socket when I'm driving could well work best unless I can tap into the alternator circuit. Combining that with a charge controller would be an interesting approach. Indeed, looking at the LIon batteries I have been looking at online, I could probably fit them into a small ammunition box. I'm a big fan of small ammunition boxes as I can pack charge controlers, battery meters, cables and USB sockets etc into them as well as the batteries. In other words, a complete and portable power source that can be carried inside the bus. Truth be told though, I'd really prefer to use a supercapacitor
One of the things I'm a fan of is simplicity. Why go to the trouble of slinging things under the bus if it's not essential? The extraction fan for the bedroom can be solar powered on the basis that it's there to remove heat, not ventillate as the bus has plenty ventillation anyway.
With the LIon house battery in a portable case, it could be charged on 120v just about anywhere. The beauty of a standard solution is it can be put together like Lego blocks. Supercaps aren't mainstream which means it'd be a build-it-myself solution and even following published plans, those things don't always work. I really like the idea of building my own electronics but 75% of the time they don't work even when made from a kit and checked scrupulously. Mind, that's petty much my experience of ready-made electronics anyway.
So, the upshot is, tasks remaining to complete:
1. Replacing self-adhesive blinds with roller blinds.
2. Installing waste water tanks.
3. Developing a house-battery solution.
4. Installing a set of bungie cord anchors for the back closet.
5. Replacing or blocking the back door lower window.
6. Replacing or blocking the two back windows.
7. Developing and installing a front door unlocking system.
8. Blanking the school bus flashers.
9. Replacing the arrow indicator lenses with amber flasher lenses.
After all that, I'd say the bus is probably about as ready as it'll ever be. I would kinda like to put some kind of handbasin in the bathroom but a bowl will do quite well.
One of the interesting things that has come to my attention is urine disposal. I hear that peeing in a composting toilet makes the whole thing stink. I'm not quite sure how it will be affected by the fact my toilet is modelled after a cat litter tray. The deposits are simply covered with cat lit. The other day, there was an article in which one bus conversion owner complained she and her girlfriend discovered they had to go and pee in the forest rather than their composting toilet. The upshot was that in the end they replaced their composting toilet with a flush toilet though the domestic toilet they used would use about 10 gallons in a single flush. That's fine for campsites but otherwise, not so great. I would not be too surprised if in the end I decide to install a black tank and a camper toilet. Now the water from that could be pumped from the shower grey tank or if the handbasin empties into a 5 gallon bucket then that could be a source of flush water.
Well, in a few days I should hear more about reclassifiying my bus as a motorhome. I think there's enough there for it to work.
Sunday, March 13, 2016
Depressingly little achieved
Today was pretty much of a washout in terms of achievement on the bus. The blinds didn't get put up. The main breaker didn't get installed. Nothing really was achieved. I have no real excuse for that. I guess I really wasn't feeling too great what with the sudden hot day, the time change and general depression.
Despite all that, I did wipe down the power socket cover with paint thinner. Then it was sprayed with grey paint. If the paint sticks then the thinner trick works. As a control sample, another area where the paint was peeling was wiped down with thinner and sprayed. It'll be interesting to see if the thinner trick actually works. I have my doubts.
The old main breaker box, I cleaned up and removed the cables, rescuing the TT30 plug that was attached to it. The next stage was to bore a hole in one side that would accommodate my 3/4" cable sleeves. That was a challenge that took literally hours. The main cause of the slowness was that the tool was entirely inappropriate. Now the reason I used an inappropriate tool is that I make so few holes of that diameter that rather than spend $25 on the proper hole saw, I spent $7 on a cheap hole saw designed for wood. I simply use it for metal and regard it as disposable. So, the hole was bored upon which the rainspots that had been hitting me off and on for the past few minutes turned into a torrential downpour.
Retreating inside the bus, I pulled out a file and filed the hole to make it really work with the inlet. After the rain had drenched the outside world, I worked on the hole a little more with the hole saw. Then the inlet was inserted followed by the end of the 3 foot section of 8-3 cable that raised so many eyebrows in Lowes (hiss, spit). The other end will go into my sub panel.
I never got as far as installing the panel. It was rather warm in the bus, hence my thoughts about a solar-powered extraction fan. I did have a go at installng a roller blind to replace the fallen stick-up blinds. Thus, I pulled out the battery drill and started drilling and drilled and drilled and drilled and made a small hole but not deep enough to achieve anything. At that point the light went so for possibly the very first time I put power through the inlet socket I installed and had light inside the bus powered by 120v mains power. That worked quite well.
I had a look for the vehicle registration documents but didn't find them in the obvious place. Clearly they much be somewhere less obvious. I need them to be able to send off to apply to have the bus retitled as a motorhome. To be absolutely honest, I think the insurance companies are being ridiculous on insisting on retitling as a motorhome just to insure everything.
Despite all that, I did wipe down the power socket cover with paint thinner. Then it was sprayed with grey paint. If the paint sticks then the thinner trick works. As a control sample, another area where the paint was peeling was wiped down with thinner and sprayed. It'll be interesting to see if the thinner trick actually works. I have my doubts.
The old main breaker box, I cleaned up and removed the cables, rescuing the TT30 plug that was attached to it. The next stage was to bore a hole in one side that would accommodate my 3/4" cable sleeves. That was a challenge that took literally hours. The main cause of the slowness was that the tool was entirely inappropriate. Now the reason I used an inappropriate tool is that I make so few holes of that diameter that rather than spend $25 on the proper hole saw, I spent $7 on a cheap hole saw designed for wood. I simply use it for metal and regard it as disposable. So, the hole was bored upon which the rainspots that had been hitting me off and on for the past few minutes turned into a torrential downpour.
Retreating inside the bus, I pulled out a file and filed the hole to make it really work with the inlet. After the rain had drenched the outside world, I worked on the hole a little more with the hole saw. Then the inlet was inserted followed by the end of the 3 foot section of 8-3 cable that raised so many eyebrows in Lowes (hiss, spit). The other end will go into my sub panel.
I never got as far as installing the panel. It was rather warm in the bus, hence my thoughts about a solar-powered extraction fan. I did have a go at installng a roller blind to replace the fallen stick-up blinds. Thus, I pulled out the battery drill and started drilling and drilled and drilled and drilled and made a small hole but not deep enough to achieve anything. At that point the light went so for possibly the very first time I put power through the inlet socket I installed and had light inside the bus powered by 120v mains power. That worked quite well.
I had a look for the vehicle registration documents but didn't find them in the obvious place. Clearly they much be somewhere less obvious. I need them to be able to send off to apply to have the bus retitled as a motorhome. To be absolutely honest, I think the insurance companies are being ridiculous on insisting on retitling as a motorhome just to insure everything.
Monday, January 4, 2016
Retitling forms
A few days ago - before I hurt my back, I picked up the form to retitle my bus as a motorhome. This is South Carolina DMV form 4038. Looking at it, it seems that they're mainly interested in the purchase of components for kit vehicles. They ask for receipts but somehow I think they won't be interested in receipts for lumps of wood and tins of paint.
The main thing they're probably going to be looking for is whether it looks like it will be converted back into a bus while nobody is looking. I gather a minority of bus hobbyists will buy a bus, register it as a motorhome and then put the seats back in, taking advantage of cheap insurance.
Needless to say, I've recycled some of the stuff that came with the bus and obtained other bits elsewhere - Lowes, Tractor Supply, Home Depot, eBay and been given a pile of stuff too. Largely though, it's been wood, paint, fittings and so on - nothing in itself all that expensive. Had I paid somebody to do what I did in my own spare time then the bill for the work done would be many thousands of dollars. I'd say the most expensive things have been the tools I've had to buy such as my welder, sander, angle grinder etc.
I could probably get away with the bus as it is save for putting up window blinds and shower curtains. For the blinds, there are some very cheap folded paper blinds that look very usable. For the shower curtains, Walmart and the dollar stores look possibilities too. Aside from that, I need to do a massive tidying up inside the bus and weeding through my stuff.
One of the things I saw while in Walmart was rectangular plates. The crockery set I have is usable but the round plates are a bit too wide for the plates drawer. My mistake - I measured correctly but forgot that the floor of the drawer would have thickness. Thus, the drawer is the thickness of the drawer bottom too short. Needless to say, I didn't have my tape measure with me last time I was in Walmart. The existing plates are nothing special - they cost me theprincely sum of $10 for the set! I bought a set of 4 but the reality is that I only need two plates - one for me and one for m'lady.
Needless to say, I've recycled some of the stuff that came with the bus and obtained other bits elsewhere - Lowes, Tractor Supply, Home Depot, eBay and been given a pile of stuff too. Largely though, it's been wood, paint, fittings and so on - nothing in itself all that expensive. Had I paid somebody to do what I did in my own spare time then the bill for the work done would be many thousands of dollars. I'd say the most expensive things have been the tools I've had to buy such as my welder, sander, angle grinder etc.
I could probably get away with the bus as it is save for putting up window blinds and shower curtains. For the blinds, there are some very cheap folded paper blinds that look very usable. For the shower curtains, Walmart and the dollar stores look possibilities too. Aside from that, I need to do a massive tidying up inside the bus and weeding through my stuff.
One of the things I saw while in Walmart was rectangular plates. The crockery set I have is usable but the round plates are a bit too wide for the plates drawer. My mistake - I measured correctly but forgot that the floor of the drawer would have thickness. Thus, the drawer is the thickness of the drawer bottom too short. Needless to say, I didn't have my tape measure with me last time I was in Walmart. The existing plates are nothing special - they cost me theprincely sum of $10 for the set! I bought a set of 4 but the reality is that I only need two plates - one for me and one for m'lady.
Sunday, January 3, 2016
Things I have learned during the progress of construction..
1. My carpentry has improved greatly but needs further improvement. It's perfectly functional but I need to learn how to make proper joins in wood rather than relying upon steel brackets, bolts and OSB panels screwed to the beams.
2. Internet forums are completely useless, full of asinine opinions, dangerous suggestions and aggressors that call my carefully constructed motorhome all kinds of names - when they're not being abusive to me personally.
3. US plumbing sizes are rather fictional. I measured a 1.5" right-angle tube at 1.75" with my tape measure - and that was the inside diameter. To find plumbing bits that fit, it's necessary to go in and try things rather than to rely upon what's written on the item itself.
4. US electrical systems are reasonably straightforward though the electricians that install things are not to be trusted. Better to look up how to do it and to do it yourself.
5. Rustoleum (Hammarite in the UK) produces the world"s most useless paint. If it can be avoided then do so.
6. Latex paint is for ceilings only.
7. Silicone sealant works but nothing sticks to it - way better to use latex sealant.
Today was a shopping day so it was a trip to Lowes (hiss, spit). I came to the conclusion that despite the fact that Lowes is unbelievably dishonest, since the nearest Home Depot and Tractor Suppy are 8 miles further and hence (even at $1.67 per gallon) an extra $1.50 to get there and an extra half hour in insane South Carolina traffic.
So, the upshot was I got enough cable to complete 60 feet of cable from the power post to my bus. I also got sufficient plumbing supplies to complete the plumbing underneath the bus. The termination in my plumbing will be a simple stopper screwed into the bottom of the line. That's just going to be there in order to stop critters from crawling up when it's not in use.
Before I did any of that, I cleaned up the steel plates that will be welded ito the battery compartment using an abrasive brush in the pistol drill. That removed most of the rust. Then I slapped Rustoleum primer for rusty metal. If that kills the rust as well as primes, I'm happy. I rather suspect it'll be just as worthless as the rest of the Rustoleum product range.
The plan is to complete the plumbing, continue working on the battery compartment in the background, reseal one seam on the bus roof, work on the peeled paint, install shower curtains and blinds over all the windows. The battery compartment isn't 100% necessary right now as long as the cable compartment that's currently there for the moment though it has to be replaced. The priority is to get the above completed and get the retitling process under way. Longer term plans - well, the sky's the limit!
2. Internet forums are completely useless, full of asinine opinions, dangerous suggestions and aggressors that call my carefully constructed motorhome all kinds of names - when they're not being abusive to me personally.
3. US plumbing sizes are rather fictional. I measured a 1.5" right-angle tube at 1.75" with my tape measure - and that was the inside diameter. To find plumbing bits that fit, it's necessary to go in and try things rather than to rely upon what's written on the item itself.
4. US electrical systems are reasonably straightforward though the electricians that install things are not to be trusted. Better to look up how to do it and to do it yourself.
5. Rustoleum (Hammarite in the UK) produces the world"s most useless paint. If it can be avoided then do so.
6. Latex paint is for ceilings only.
7. Silicone sealant works but nothing sticks to it - way better to use latex sealant.
Today was a shopping day so it was a trip to Lowes (hiss, spit). I came to the conclusion that despite the fact that Lowes is unbelievably dishonest, since the nearest Home Depot and Tractor Suppy are 8 miles further and hence (even at $1.67 per gallon) an extra $1.50 to get there and an extra half hour in insane South Carolina traffic.
So, the upshot was I got enough cable to complete 60 feet of cable from the power post to my bus. I also got sufficient plumbing supplies to complete the plumbing underneath the bus. The termination in my plumbing will be a simple stopper screwed into the bottom of the line. That's just going to be there in order to stop critters from crawling up when it's not in use.
Before I did any of that, I cleaned up the steel plates that will be welded ito the battery compartment using an abrasive brush in the pistol drill. That removed most of the rust. Then I slapped Rustoleum primer for rusty metal. If that kills the rust as well as primes, I'm happy. I rather suspect it'll be just as worthless as the rest of the Rustoleum product range.
The plan is to complete the plumbing, continue working on the battery compartment in the background, reseal one seam on the bus roof, work on the peeled paint, install shower curtains and blinds over all the windows. The battery compartment isn't 100% necessary right now as long as the cable compartment that's currently there for the moment though it has to be replaced. The priority is to get the above completed and get the retitling process under way. Longer term plans - well, the sky's the limit!
Friday, January 1, 2016
No wonder I'm depressed....
Today turned out to be yet another dull, grey, dreary day. No rays of sunshine to lift my gloomy mood. The one thing I love about the US is the way there are many more sunny days than cloudy days. Cloudy days just sap my strengh and my will and frequently (as today) give me a distanced feeling as though I'm not really here. I believe it's called Seasonal Affected Disorder.
Despite this, I went to the bus to install my new vanity top and promptly broke the tip off my drill bit, rendering it useless. That meant a trip to Lowes (hiss, spit). There, I picked up a couple of packs of 3/32 drill bits just in case. While I was there I also picked up a 5-15 plug to make the other half of my 20A extension cord. I don't want to get the 30A cable yet - I'll stay cheap right now. Then while I was there, I looked at plumbing supplies but as I didn't know exactly what I have, I didn't get anything. It turned out from investigations last night that the second part of the downpipe from the shower isn't needed - the plastic fittings I have will clamp onto the first section very sucessfully. It seems that I can simply take an off-the-shelf fixture to fasten the bottom of the tube to the side of the bus. There are some rather nice valves available to use to close the end of the pipe off when it's not needed to empty. They're somewhat stiff which means they'd definitely need to be secured very firmly. Thus, for the moment, I'll stick with my screw-in bung.
Returning to the bus, I screwed the countertop down that I'd been working on yesterday then sat in the bedroom with a cup of tea and my tablet for a few minutes. What with the dreary, miserable weather I'd taken to playing a game called "Boom Beach" and without funding the programmers drug habit by buying game credits with real money that's hard to earn, it was increasingly hard to continue. Thinking about it, while watching the dwelling I'd just errected commencing its count down to 5 hours before it could be used, I came to the inevitable conclusion that the game was as the Americans euphamistically say, "a crock".
Having deleted the game, I set about cutting some more steel for the battery compartment only it wasn't that simple. The angle grinder needed a new disk so that was installed. Then I had to find the adaptor in order to connect the grinder to my TT30 socket. That was a hunt! It was eventually discovered, hidden underneath an immense pile of Christmas stockings.
I cut the steel and then tried to straighten an angle out of the steel. It's showing progress but the work is very slow. I suspect that this might take longer than I want to spend on it.
Meanwhile, I looked at the DMV form to retitle the bus and it needs photographs of the inside plus details plus the original bus title. This is a totally different form from the one I was shown before. It looks way more likely as a form so I suspect I probably have the right form this time. I have a lot of tidying to do inside the bus before I take photos.
I believe I'm pretty close to having it in retitlable condition. As far as I can see, I can just run it as an electric motorhome and pop a portable generator in for the inspection. Water - aside from plumbing the waste pipe properly, is already done. The shower curtains, blinds over the windows and a front door unlocking gizmo is all that's needed. Everything else should work just fine. The whole bus needs a darned good cleanig and spruce up but that should be it!
Despite this, I went to the bus to install my new vanity top and promptly broke the tip off my drill bit, rendering it useless. That meant a trip to Lowes (hiss, spit). There, I picked up a couple of packs of 3/32 drill bits just in case. While I was there I also picked up a 5-15 plug to make the other half of my 20A extension cord. I don't want to get the 30A cable yet - I'll stay cheap right now. Then while I was there, I looked at plumbing supplies but as I didn't know exactly what I have, I didn't get anything. It turned out from investigations last night that the second part of the downpipe from the shower isn't needed - the plastic fittings I have will clamp onto the first section very sucessfully. It seems that I can simply take an off-the-shelf fixture to fasten the bottom of the tube to the side of the bus. There are some rather nice valves available to use to close the end of the pipe off when it's not needed to empty. They're somewhat stiff which means they'd definitely need to be secured very firmly. Thus, for the moment, I'll stick with my screw-in bung.
Returning to the bus, I screwed the countertop down that I'd been working on yesterday then sat in the bedroom with a cup of tea and my tablet for a few minutes. What with the dreary, miserable weather I'd taken to playing a game called "Boom Beach" and without funding the programmers drug habit by buying game credits with real money that's hard to earn, it was increasingly hard to continue. Thinking about it, while watching the dwelling I'd just errected commencing its count down to 5 hours before it could be used, I came to the inevitable conclusion that the game was as the Americans euphamistically say, "a crock".
I cut the steel and then tried to straighten an angle out of the steel. It's showing progress but the work is very slow. I suspect that this might take longer than I want to spend on it.
Meanwhile, I looked at the DMV form to retitle the bus and it needs photographs of the inside plus details plus the original bus title. This is a totally different form from the one I was shown before. It looks way more likely as a form so I suspect I probably have the right form this time. I have a lot of tidying to do inside the bus before I take photos.
I believe I'm pretty close to having it in retitlable condition. As far as I can see, I can just run it as an electric motorhome and pop a portable generator in for the inspection. Water - aside from plumbing the waste pipe properly, is already done. The shower curtains, blinds over the windows and a front door unlocking gizmo is all that's needed. Everything else should work just fine. The whole bus needs a darned good cleanig and spruce up but that should be it!
Wednesday, December 23, 2015
Rainy day at the Chicken Ranch!
No - not that kind of chicken ranch - the kind that actually has chickens that lay eggs! It's pouring down rain like there's no tomorrow. Indeed, after my hot shower this morning, I've had several cold showers since that made my hot shower seem somewhat arid in comparison.
Being a rainy day, I went shopping after my voluntary work this morning. Stopping off in a few places, I found that the Geek Squad won't work on tablets. I was, fortunately, referred to The SmartPhone Medic. Arriving there I found that they couldn't tell me anything because the boss was away. That begged the question as to why the place was even open and staffed since the staff seem so purposeless.
The next stop was *spit* Lowes where I got some copper tubing to make the base for the coil for my magnet. While there, I looked at the price of cables. $1.15 per foot for 20A and $1.89 per foot for 30A. Needless to say, since I want to set up for both 20A and 30A I bought 20A cable. Now, I don't really see a true requirement for 30A though internally the bus is wired for 50A. I figure a microwave will draw 10-12 amps and a fridge - if I install one - will draw 2-7A. That's 19A and I can always unplug something if I need to use more amperage. Now I bought 30 feet of 20A cable. That worked out at $34.50 whereas a 30A cable the same length would have been $56.70 - that's appreciably more. I also got a 20A double pole breaker just so I won't accidentally overload the cable if I end up plugging into a 100A, 50A or 30A supply. 30 feet should do for most things. If I need longer cable then 20A is going to save me a bundle. Ready made 20A cable of 25 feet was $80 which I thought excessive! Admittedly I had to buy a 15A plug and 15A socket so theoretically I'll be overloading them. The truth is though that they're made the same as a 20A but with the live pin angled differently. I needed 20A cable in order to supply the welder. If I need more cable - say another 30 feet then the savings with 20A over 30A are much larger.
The general plan is to be able to use 20A and 30A. That's way off in the future though. Right now the plan is to get the bus operational as a motorhome. There's welding to do but that'll have to wait until a dry day. Putting the cable together is a breeze that can be done in approximately 20 minutes. Initially I'll put a 15A socket on one end but after I've got everything done, I'll switch that to one of my Nema 5-30/6-30 connectors.
The big battle is to get things done enough that the bus is operational. Then I can get it retitled as a motor home. Speaking of retitling, today I took advantage of the deluge to visit the DMV to get the retitling papers. As I suspected, nobody wanted to get wet so I popped in to ask which forms I needed. The reeptionist pointed to a seat and told me somebody would be out to help and within a minute or so, a very helpful lady arrived, asked what I needed, zoomed off and returned with some papers. It was all very civilised and very quick.
Once I have the cable/battery compartment completed and a battery installed powering USB and 12V devices, I"ll be ready to retitle. There'll be a lot of tidying and rearranging to be done inside plus installation of roller blinds or drapes as well as the shower curtains but it's all getting tantalisingly close!
Being a rainy day, I went shopping after my voluntary work this morning. Stopping off in a few places, I found that the Geek Squad won't work on tablets. I was, fortunately, referred to The SmartPhone Medic. Arriving there I found that they couldn't tell me anything because the boss was away. That begged the question as to why the place was even open and staffed since the staff seem so purposeless.
The next stop was *spit* Lowes where I got some copper tubing to make the base for the coil for my magnet. While there, I looked at the price of cables. $1.15 per foot for 20A and $1.89 per foot for 30A. Needless to say, since I want to set up for both 20A and 30A I bought 20A cable. Now, I don't really see a true requirement for 30A though internally the bus is wired for 50A. I figure a microwave will draw 10-12 amps and a fridge - if I install one - will draw 2-7A. That's 19A and I can always unplug something if I need to use more amperage. Now I bought 30 feet of 20A cable. That worked out at $34.50 whereas a 30A cable the same length would have been $56.70 - that's appreciably more. I also got a 20A double pole breaker just so I won't accidentally overload the cable if I end up plugging into a 100A, 50A or 30A supply. 30 feet should do for most things. If I need longer cable then 20A is going to save me a bundle. Ready made 20A cable of 25 feet was $80 which I thought excessive! Admittedly I had to buy a 15A plug and 15A socket so theoretically I'll be overloading them. The truth is though that they're made the same as a 20A but with the live pin angled differently. I needed 20A cable in order to supply the welder. If I need more cable - say another 30 feet then the savings with 20A over 30A are much larger.
The general plan is to be able to use 20A and 30A. That's way off in the future though. Right now the plan is to get the bus operational as a motorhome. There's welding to do but that'll have to wait until a dry day. Putting the cable together is a breeze that can be done in approximately 20 minutes. Initially I'll put a 15A socket on one end but after I've got everything done, I'll switch that to one of my Nema 5-30/6-30 connectors.
The big battle is to get things done enough that the bus is operational. Then I can get it retitled as a motor home. Speaking of retitling, today I took advantage of the deluge to visit the DMV to get the retitling papers. As I suspected, nobody wanted to get wet so I popped in to ask which forms I needed. The reeptionist pointed to a seat and told me somebody would be out to help and within a minute or so, a very helpful lady arrived, asked what I needed, zoomed off and returned with some papers. It was all very civilised and very quick.
Once I have the cable/battery compartment completed and a battery installed powering USB and 12V devices, I"ll be ready to retitle. There'll be a lot of tidying and rearranging to be done inside plus installation of roller blinds or drapes as well as the shower curtains but it's all getting tantalisingly close!
Subscribe to:
Posts (Atom)