No wonder I'm depressed....

Today turned out to be yet another dull, grey, dreary day. No rays of sunshine to lift my gloomy mood. The one thing I love about the US is the way there are many more sunny days than cloudy days. Cloudy days just sap my strengh and my will and frequently (as today) give me a distanced feeling as though I'm not really here. I believe it's called Seasonal Affected Disorder.

Despite this, I went to the bus to install my new vanity top and promptly broke the tip off my drill bit, rendering it useless. That meant a trip to Lowes (hiss, spit). There, I picked up a couple of packs of 3/32 drill bits just in case. While I was there I also picked up a 5-15 plug to make the other half of my 20A extension cord. I don't want to get the 30A cable yet - I'll stay cheap right now. Then while I was there, I looked at plumbing supplies but as I didn't know exactly what I have, I didn't get anything. It turned out from investigations last night that the second part of the downpipe from the shower isn't needed - the plastic fittings I have will clamp onto the first section very sucessfully. It seems that I can simply take an off-the-shelf fixture to fasten the bottom of the tube to the side of the bus. There are some rather nice valves available to use to close the end of the pipe off when it's not needed to empty. They're somewhat stiff which means they'd definitely need to be secured very firmly. Thus, for the moment, I'll stick with my screw-in bung.

Returning to the bus, I screwed the countertop down that I'd been working on yesterday then sat in the bedroom with a cup of tea and my tablet for a few minutes. What with the dreary, miserable weather I'd taken to playing a game called "Boom Beach" and without funding the programmers drug habit by buying game credits with real money that's hard to earn, it was increasingly hard to continue. Thinking about it, while watching the dwelling I'd just errected commencing its count down to 5 hours before it could be used, I came to the inevitable conclusion that the game was as the Americans euphamistically say, "a crock".

Having deleted the game, I set about cutting some more steel for the battery compartment only it wasn't that simple. The angle grinder needed a new disk so that was installed. Then I had to find the adaptor in order to connect the grinder to my TT30 socket. That was a hunt! It was eventually discovered, hidden underneath an immense pile of Christmas stockings.

I cut the steel and then tried to straighten an angle out of the steel. It's showing progress but the work is very slow. I suspect that this might take longer than I want to spend on it.

Meanwhile, I looked at the DMV form to retitle the bus and it needs photographs of the inside plus details plus the original bus title. This is a totally different form from the one I was shown before. It looks way more likely as a form so I suspect I probably have the right form this time. I have a lot of tidying to do inside the bus before I take photos. 

I believe I'm pretty close to having it in retitlable condition. As far as I can see, I can just run it as an electric motorhome and pop a portable generator in for the inspection. Water - aside from plumbing the waste pipe properly, is already done. The shower curtains, blinds over the windows and a front door unlocking gizmo is all that's needed. Everything else should work just fine. The whole bus needs a darned good cleanig and spruce up but that should be it!

Frustrations

Today started with my laying conduit on the ground from the outside breaker box to where I was going to have my plugin. Then I was going to erect a stake for the socket. The plan was to have the electrics completely done today but as with plans, little was actually accomplished.

The blower swiftly removed fallen leaves and the conduit was layed over the ground. The next stage will be to insert the cable and bury the conduit. I can certainly do better than the Dish Network people that didn't bother burying their cables. An ants nest was revealed and the scurrying ants blown away too.

When it came to cutting a point on the metal stake intended for use with the outside socket, I hit my first big problem of the day. My angle grinder stopped working. After some tinkering, I gave up on it as a lost cause and zoomed off to buy a new one. They're cheap enough at Harbor Freight for $15.

After returning home with my new angle grinder, I proudly plugged it in and it didn't work. Nothing I did could make it work. Putting it away and cursing Harbor Freight, I pulled out a hacksaw and completed the task. Then I drove the stake into the ground.

By then, the light was beginning to fail but I took another look at the angle grinder and found how to dismantle it properly. It seems one of the carbon brushes on the motor had broken. Looking around as I recall there had been spares, I found some that didn't fit.

Clearly either I found spare brushes for another device or Harbor Freight put the wrong brushes in the box. This is rather disappointing and frustrating!

As tomorrow is a party day, nothing will be done. Friday being shop til you drop day, should be good. Everybody will be out on the roads hunting non existent bargains. A good time not to go to Harbor Freight!

Even without an angle grinder, I can complete my wiring in order to run my welder. I fully intend to be welding by Sunday night!

In other news, the Peltier cooler arrived. The glue that fixes it to cooling vanes arrived a few days ago as did the solar panel to power it. I'm still waiting for the cooling vanes.

I've ordered a long permanent magnet to use with a home made coil for my door opening device. Failing that I did see a likely looking solenoid but I'd rather try building something myself first rather than going to a last resort of buying somebody else's junk.

This bus project is taking longer than anticipated. Were I starting again, I would definitely take a different route. Meanwhile I'll have another hunt for the right carbon brushes. Harbor Freight surely can't have been dumb enough to supply the wrong brushes?