Bang - ouch - grunt - bang - ouch!

That was pretty much how my day went. I spent most of the day underneath the bus, fitting the back on the power inlet. Now I'm using a Nema 5-30 when the recommended connector is the Nema 6-30. Neither has any particular advantage. Both will carry 30A at 120v. It just so happens that I managed to get 6-30 and 5-30 inlets by mistake. The 5-30 connectors were available but the 6-30 were not so I ended up with the solution I have. It's non-standard because the connectors are designed for two live wires as opposed to live and neutral but it works when one is wired live and the other, neutral.

Fighting with 50A cable in the confined space under the bus is not to be recommended. I bumped my head countless times. In the end and after a lot of time, some of which was wasted by having to fetch tools I had not envisaged needing, I managed to put everything together. The cable was too thick to allow me to install a rubber gromet around it. Well, that's not quite true - the cable was so thick and difficult to manover, I didn't manage to install the rubber gromet. I might return to that tomorrow or I might just squirt some silicone sealant in the gaps.
 
I would like to have some sort of guard around the wire but I'm not sure it's going to be that easy to install. Having said that, I can`t imagine anything is going to hit it, where it is.

Today I made use of the old battery compartment I built. I simply tack welded a brace on one side to make it less flexible then tack welded a top on. Now it's a handy support for my redundant 15 gallon barrel. That's going to be used to collect kitchen grease at m'lady's home.
  
At least it's going to have some use. I'm finding that nothing that came with the bus that was attached by the hillbillies was worth keeping. I spent two months working with various attempts at building compartments before I finally decided it wasn't worth the bother.

After welding the compartment remnants together to form something useful, I turned to the gas cylinder. Cutting it open surprised me. The steel was thicker than I'd thought at about 16 gauge and it was rusty inside. Looking at the thickness of the steel, I wasn't surprised that the bullet didn't penetrate both skins. It did prove that the people that hide behind car doors during a gunfight have a point. 9mm will go through the first leaf then the second will stop the bullet. I was quite surprised about that!

As can be seen, the bottom of the cylinder has indentations. This makes the bottom unsuitable for use as a handbasin. The top is similarly unsuitable as it has not just a valve but a pressure release plate. That's all fixable but it's just too much messing about. Better to look elsewhere for my handbasin.

The bullet was surprising. During its entry, it remained complete but seems to have lost its copper jacket at some point. The copper and lead are two entirely separate entities which probably accounts for the double dent on the non-penetrated side. At a guess, I'd say it shed the jacket as it came in through the entry hole.

As you can see, the jacket and the lead core are now separate! I didn't think this would happen.

In terms of what was done today - I put the power inlet into the bus. The main breaker is not yet installed but might be tomorrow. My 20A cables are 30 feet and 20 feet long. The 30 foot long length is just a shade too short to reach the bus. I could move the power socket and really should but I'll leave it where it is. I'll probably get a 40 foot 30A cable and make that up, maybe tomorrow. Tonight it's just too late to go and buy any cabling. 

After dinner, I took my LED lantern and went back to the bus. I didn't leave it plugged in as I have as yet not installed the main breaker box. I'll get to that tomorrow. Instead, I hung my LED lantern up in the bathroom and put up 10 rivnuts with screw eyes. Those will take S hooks and I will hang my shower curtains from them. 

It might be worthwhile to put a further rivnut and screw eye from which to hang the LED lantern. Very handy for showering in the dark! 

Not mentioned so far today, two more of my self-stick blinds have fallen down. Clearly the glue isn't up to much. I need to get some roller blinds to replace them. I might actually put off getting the 30A cable a while. It's not strictly necessary just yet. The main breaker box is far more important!

If I speed on with a trip to the store tomorrow, there's no reason why I can't clean the bus, install the blinds, install the shower curtain and take photos for the retitling process. The shower curtain will take mere minutes to install. The blinds won't take that much longer. Cleaning isn't going to take a huge amount of time either! There's only 210 square feet of bus!