That's what I need to be! Contorting myself to fit into the space under my countertop is hardly fun nor easy then to hold and work with tools while doing so adds further to the challenge!
As somebody recommended a strain relief clasp to secure the 55A cable against movement, that meant a trip to Lowe's, during which I filled up with gasoline at an almost unheard of $1.79! Not 4 years ago I was seeing $4.15 a gallon.
In Lowe's, the plan was to get a strain relief clasp for the big cable, one for the small cable and something for the main breaker under the bus. Added to the list was 5 feet of flexible 30A cable in order to put a pigtail connector.
Of course, I met a helpful fellow in Lowe's who was so eager to please that in the course of discussion of his proposed solution to which I listened intently, I got confused about what I was getting. Thus I came away without one of the waterproof cable connectors that I wanted.
Oddly enough, not having the connector didn't affect matters much. I didn't get half the things done that I wanted to. Working under the countertop is an awkward process that's hot and laborious as well as extremely uncomfortable.
By the time I knocked off for the day, I'd put two strain relief clasps into the breaker box, put the main cable through the strain relief clasp, found a bolt and kinda-sorta tightened the earth cables to the case. They could be tighter but getting in there to do it is all but impossible. Earth wiring isn't that important what with most appliances being unearthed anyway but I'd like to get it right!
Two socket boxes were secured in place and one socket was wired. Stapling the wires to the woodwork was a challenge as I lay under the countertop. I didn't complete the run of the wire because I couldn't find my hacksaw to cut the wire. My LED lantern throws out a good light but it's no good for hunting for things in the dark.
On Wednesday my 30A socket should arrive. Rather than cutting a hole in the side of the bus to accommodate it, the new plan is to locate it underneath the bus where it'll be protected from rain. This also allows me to mount it to the floor of the forthcoming new battery/cable compartment.
I had hoped to have the electrics completed this weekend but with the challenges, its taking longer. I'll probably have that done by next weekend. Aside from a strain relief grommet, there shouldn't be anything else needed.
As somebody recommended a strain relief clasp to secure the 55A cable against movement, that meant a trip to Lowe's, during which I filled up with gasoline at an almost unheard of $1.79! Not 4 years ago I was seeing $4.15 a gallon.
In Lowe's, the plan was to get a strain relief clasp for the big cable, one for the small cable and something for the main breaker under the bus. Added to the list was 5 feet of flexible 30A cable in order to put a pigtail connector.
Of course, I met a helpful fellow in Lowe's who was so eager to please that in the course of discussion of his proposed solution to which I listened intently, I got confused about what I was getting. Thus I came away without one of the waterproof cable connectors that I wanted.
Oddly enough, not having the connector didn't affect matters much. I didn't get half the things done that I wanted to. Working under the countertop is an awkward process that's hot and laborious as well as extremely uncomfortable.
By the time I knocked off for the day, I'd put two strain relief clasps into the breaker box, put the main cable through the strain relief clasp, found a bolt and kinda-sorta tightened the earth cables to the case. They could be tighter but getting in there to do it is all but impossible. Earth wiring isn't that important what with most appliances being unearthed anyway but I'd like to get it right!
Two socket boxes were secured in place and one socket was wired. Stapling the wires to the woodwork was a challenge as I lay under the countertop. I didn't complete the run of the wire because I couldn't find my hacksaw to cut the wire. My LED lantern throws out a good light but it's no good for hunting for things in the dark.
On Wednesday my 30A socket should arrive. Rather than cutting a hole in the side of the bus to accommodate it, the new plan is to locate it underneath the bus where it'll be protected from rain. This also allows me to mount it to the floor of the forthcoming new battery/cable compartment.
I had hoped to have the electrics completed this weekend but with the challenges, its taking longer. I'll probably have that done by next weekend. Aside from a strain relief grommet, there shouldn't be anything else needed.
No comments:
Post a Comment