Monday, September 21, 2015

Caulked

Today before work, I completed caulking around the shower base. That's not going to be moving anywhere on its own now. The next thing will be to install the underfloor waste tanks or at the very least, a way of emptying the waste. The waste pipe definitely needs another nut to hold it down but that has to be applied from under the bus. I don't actually have that nut either. Since Lowe's does respond to their twitter account, I sent them a tweet to try to get if not another nut, at least the specifications so I can order one online.

Lowes did eventually respond with the ultimate answer that they weren't going to help. Meanwhile I diud track down the real manufacturer, Danco and explained that due to a constructional oddity I needed a second nut. As of now I'm awaiting their response. Worst case scenario, I have to buy a complete second outlet just to get the nut!

The handbasin since it looks like its going to be used, needs to be fastened down, somehow. The proper mountings never came with it so I will probably have to get creative. It's one of the reasons I don't like that handbasin.

Since I'm waiting on plumbing parts, I'll probably work on rebuilding the battery/cable compartment. Unlike the hillbillies, I'll build it with real angle iron of which I have a large supply. Alternatively I could use aluminium which would be lighter though I'd have to buy the aluminum. Either way, I need to buy nuts and bolts. Ideally I'd rivet it but don't have a supply of strong enough rivets nor an appropriate rivet gun.

My Nema 5-30 inlet arrived today. My next task is to fit it where it can be used. To do that, I need to rebuild the cable compartment. I really wish the hillbillies hadn't made such a massive compartment. It really wasn't necessary. Really and truly, I don't need that compartment. I'd rivet the blessed thing shut given half a chance! Sadly though, I need some kind of access hatch to access my main breaker. I do wonder about cutting the door in half and putting a half-sized compartment instead. One that contains just the breaker box. The cable I can store elsewhere. As far as a house battery is concerned, I can put that in anytime and it really doesn't need a special compartment. If the compartment housed solely the breaker and Nema 5-30 socket then it need not be built strongly. In fact it could just be there to protect the contents from water!

Installing batteries is another issue entirely. Speaking of which, I noted the fridge I removed from the bus was made by Avanti. Looking at Walmart's website a search for Avanti threw up a so-called superconductor fridge for $120ish that runs off 120v AC or 12v DC. Current consumption was high at 83 watts but that's because it probably runs off a heater element. That looks interesting and something that could be fun off a pair of batteries.

I'm still waiting for my drawer bolts to arrive. They should be here anytime now. That'll complete the galley area. The bathroom plumbing and every underbody facility are my main battlegrounds now.

2 comments:

  1. My nephew and his friend (he's a master electrician) came by today and I showed them your wiring scheme. The friend said you don't need that breaker box; the campground power panel breaker protects your bus wiring. He also said your idea to use two small extension cords instead of one large one will result in a shock hazard if one cord becomes unplugged at the "Y". Assuming you keep the breaker box, the neutrals should all connect to the neutral bus bar instead of the unused breaker and the grounds should attach to the box ground bolt or bar. Grounds and neutrals should not be connected to the same bus bar.

    ReplyDelete
    Replies
    1. The breaker protects me from inept campground wiring.

      The two cable approach would need careful consideration with the connections

      Delete